Tag: hvac maintenance

Top-Rated AC Repair Houston Expert: How Does An Air Conditioner Work?

Posted by acman on July 25, 2018

#1 Houston AC Repair Company: Understanding The Basics Of An Air Conditioning System

While you are sitting inside in your cool and comfortable house, have you ever wondered how your air conditioner actually works? In the simplest terms, it is through a chemical known as a refrigerant. This chemical travels throughout the house and outdoors while removing hot air with cool air. The refrigerant will cool the air as it reenters the home and the cycle begins all over again. This aids in the process of having better overall indoor air quality. If you want to understand a fundamental breakdown of the way a residential and commercial air conditioning system works keep on reading.

1. The Parts Of An Air Conditioning

Almost all air conditioning systems consist of four parts a compressor, a condenser, an expansion device, and an evaporator. The evaporator is found within the home as this is where the refrigerant will evaporate. Fans that are located inside of the home will blow the air across the evaporator’s coils. As air from the home travels across the evaporator, the refrigerant that is in the coils will pick up the temperature from the air. The refrigerant absorbs the heat found in the air and will turn it from liquid to vapor. It goes from being a cool liquid to a hot vapor and as the heat is removed the air goes from warm to cool. Ac repair Houston specialists always emphasis the parts of the ac because if you can understand the anatomy you can more easily understand how everything functions.

2. How Air Conditioning Works

A vaporized refrigerant will pass through a compressor which is typically found outside of the air conditioning unit next to the home along with a condenser. The compressors the main job is to compress the gas into a state of high pressure and high temperature. From this point, the hot pressurized gas will flow to a third component, the condenser. It is at this junction that the gas will be condensed back to a liquid state while the heat is radiated away. An outdoor unit will have metal fins to help remove the heat at a quicker pace. The liquid that has fully cooled off is now ready to return into the home. The expansion device will regulate the flow of the liquid refrigerant into an evaporator, where once again it absorbs the key and changes from a liquid to a low-pressure gas.

3. Moisture Trap Found In An A/C

While we typically consider an air conditioner to simply just remove heat from the home, it does much more than that. Its other job is to condition the air. AC repair Houston experts say that it is always smart to understand aspects of the ac in your home in case you may need repair services. Humidity is one of the main factors of how we feel he, the more you made a room or the environment is, the less we are able to sweat and remove the unwanted body. In order for a home or business to feel more comfortable, and the air conditioner must be able to dehumidify the air and surroundings. Is there moves from the evaporator coil, the coil will absorb not only the heat but moisture as well? You now have air that is going to be much cooler and drier when it comes out of the vents and is able to make a room comfortable. The water that is rung out of the air by an air conditioner may collect or drain out of the unit on highly you middays. Almost all modern air conditioners today are able to control humidity levels indoors. In fact, it was Willis Carrier who drew up the original plans for this type of design way back in 1902. He designed the first unit not to cool the room but to control the humidity levels. The cooling of the room was an added benefit at the time. It would take almost 60 years or America to truly embrace the benefits of an air conditioner. Before that, air-conditioners were truly a luxury item and not available to everyone.

Contact A Top-Rated AC Repair Houston Company

So next time you need to call upon the services of the best AC repair Houston has to offer, just be glad you have one and it will be working so enough! Next time you are in dire need of maintenance or repair services for your air conditioner make the smart choice of picking the best ac repair Houston company in near you. AC Man Of Houston is always here to help answer any questions you may have. We are available to talk when you are ready. Contact us for a consultation or to request a quote. (713) 460-2653

Katy TX A/C Repair: Learn How To Clean The Air Conditioning Evaporator Coils

Posted by acman on June 11, 2018

Katy TX Air Conditioning Repair: A Guide On How To Properly Clean Evaporator Coils

Regular preventive maintenance is essential in making sure your air conditioner continues to work properly. You should have maintenance performed at least once per year before the cooling season begins. Season maintenance should be performed by a professional air conditioning repair Katy TX company. Tasks that should be performed include system adjustment and testing, component replacements, minor repairs, air filter changes, and cleaning condenser coils and evaporator.

The Basics Of Cleaning A/C Evaporator Coils

Check and clean the evaporator coils as needed. Monthly cleaning might be required if the coils tend to easily collect debris and dirt. Otherwise, you might need to clean them out every three months or so during the cooling season or yearly as part of your regular preventative maintenance. AC Man of Houston offers maintenance services for commercial properties.

Gaining Access To Clean The A/C Evaporator Coils

There should be an access to the indoor air handling unit that you can remove in order to get to the evaporator coil. Check your owner’s manual if necessary to find the evaporator coil and access panel. On the thermostat, turn your air conditioner off. To get the access loose, remove the screws or another type of fasteners. Set the screws and panel aside where you won’t separate or lose them. Check out our residential services by clicking here.

Using Compressed Air To Clean The A/C Evaporator Coils

You can use compressed air to remove light accumulations of materials such as dirt by blowing them off of the evaporator coil.
Direct the compressed air over the coil. Move in the opposite direction of regular air flow from the cleanest to the dirtiest side.
For pieces that are more stubborn, take the air nozzle and please near the bottom part of the debris. If high-pressure air is being used, direct it either through the fins directly or at a 90-degree angle. That will prevent the fins from getting damaged.
Maintain consistent airflow over the coil. That will dislodge the buildup without it being further forced into the fins which will make it harder to remove.
Avoid blowing debris, dirt, and dust into the living spaces of your home or into your ductwork system. Wear eye protection so that material is kept out of your eyes. Use a shop vacuum, if necessary, to collect the material as it is being dislodged.

Using A Brush To Clean The A/C Evaporator Coils

Brush cleaning is a very effective way to remove minor dirt accumulations from the evaporator coils. It enables you to avoid having to use chemicals or liquid and provides you with greater control in terms of the amount of pressure applied to the fins and coils.

Apply your brush to the evaporator coils to sweep away dirt accumulation.
Use the brush to scrub and break lose materials that are harder to remove.
Avoid using a hard-bristle brush or wire brush since the might damage the fins.

Using Commercial Cleaners To Clean The A/C Evaporator Coils

There are several commercial cleaning brands that you can use to clean evaporator coils. A majority of them are foaming kinds that break down and then drain into the drainage system of the unit. Consult with a reputable local HVAC contractor for recommendations on the best clean to use for your specific situation.

Using Water And Mild Detergents To Clean Your A/C Evaporator Coils

Instead of using a commercial cleaner, warm water and a mild detergent can be used for cleaning the coils.

Mix a simple detergent and warm water into a spray bottle, garden sprayer or hand sprayer.
Apply the detergent and water solution to your evaporator coils.
Let the solution soak in for a few minutes to that it can soak in and also loosen debris.
Use a brush or soft close to wipe away loose material.

Learn more about AC Man of Houston and our air conditioning repair Katy tx services by checking out our blog, contacting us for questions or concerns or calling us for immediate assistance.

A Top-Rated AC Repair Houston Company Talks About The Way Air Conditioners Work

Posted by acman on June 8, 2018

A Guide By The #1 AC Repair Company On How Air Conditioners Work In Houston

If you moved recently from a house where you mainly used window-mounted air conditioners, fans, or were considering having a central air unit installed, you might not be that familiar with central air conditioning systems. However, don’t worry. We are here to help you with AC repair Houston services. Air conditioning units work the same way that the refrigerator does, just on a bigger scale. Basically, your air conditioner converts gas quickly into liquid and then back again through using a chemical that transfers heat from in the air from inside of your house to the outside.

Ducts

Basically how it works is that heat is pulled out of a home by split cooling systems with refrigerant that circulates in between the air handler and condenser. Cool air is distributed by the supply ducts from the air handler into the rooms in your house. Warm air is carried back by the return ducts to the air handler so that it can be cooled and filtered through a 16x25x1 furnance Filter or similar. When ducts are sized properly they deliver conditioned air quietly and evenly throughout your home. We offer many services at our ac repair Houston company, especially for residential properties.

Registers

Every room needs to have two grilles at least: one that is connected to a return and the other to a supply duct. Supply registers should ideally be located near or on the ceiling, while return registers should be on or near the floor.

Air Handlers

This type of indoor equipment comes with an expansion valve that transforms refrigeration into a cool liquid that flows throughout the evaporator coils. Air is pushed over the coils by a blower, which heats up the refrigerant into the gas form that is returned to the condenser.

Condensers

A warm gaseous refrigerant is taken from your house, and then the compressor pressurizes it and condenses it back into liquid form as the coils are cooled by a fan.

Indoor Unit

Typically the indoor unit is located in a basement or closet close to where the furnace filter is. The unit is comprised of a coil box containing the evaporator. The evaporator enables the refrigerant – which is a cooling fluid contained inside of the coiled piping and referred to by its brand name sometimes – to absorb heat and evaporate. After the heat has been absorbed from inside of your house, only cool air is left and sent back into your house. Just like water absorbs heat from the stove to evaporate or boil, heat is absorbed by refrigerant from your home. That means that both refrigerant and water turn to vapor from a liquid as heat is absorbed. we offer ac repair Houston services for commercial properties.

Outdoor Unit

Usually, the outdoor unit is located on the side or rear of the house. This is where the heat gets dispersed from inside of your house. It is comprised of a fan, condenser coil, and compressor. The heat that is absorbed from the air in your home gets transferred over to the refrigerant. Next, it gets pumps into the outdoor unit. The heat gets absorbed and the refrigerant moves it over to the outdoor coil, where it passes through the unit’s compressor. The main job of the compressor is to move the refrigerant throughout the air conditioning system. That is important since you can then continue to reuse the refrigerant for cooling your home. This refrigerant gets compressed into a higher pressure and then is moved throughout the condenser or outdoor coil. As the refrigerant is passing through the condenser, ambient air is delivered by a fan across the system’s condenser coil which causes it to cool down. As this process is complete, the heat inside of your home gets dispersed into the air outside of your home. Then the refrigerant gets pumped back inside and the entire process repeats itself.

Were you aware that cooling your home was less about cold air being increase and more about eliminating existing heat? For more related articles check out our ac repair Houston blog or call us for assistance.

AC Heroes: The Ultimate Air Conditioner Air Filter Guide

Posted by acman on May 31, 2018

A Basic Guide To Understanding AC Air Filters

What Do You Risk By Installing The Wrong AC Air Filter?

Professional HVAC technicians recommend replacing air filters every three months at a bare minimum. Changing filters on a monthly basis is ideal for maintaining optimum air quality in your home. There are other benefits to frequent filter changes, though – one’s technicians care about even more than indoor air quality. A clean filter does a better job of protecting your air conditioner. That is, in fact, the filter’s primary purpose. If you installed the wrong filter, you may be putting your air conditioner at significant risk.

How Your AC Air Filter Really Works

While modern filters do an effective job of filtering allergens and other unwanted contaminants out of the air in your home, their point and purpose remain to safeguard the equipment in your AC system. Without a filter, your air conditioner could easily suck in particles large enough to damage its working parts. A filter needs to defend against this possibility without unduly restricting the amount of air flowing through the system. As a filter accumulates more particles, it also starts restricting more airflow. This is why your filter needs to be changed regularly to keep the system running smoothly.

Considering An Air Filter Upgrade?

An increasing number of homeowners are interested in improving the quality of the air in their homes. This leads many people to consider installing more potent filters in their air conditioning systems. The problem here is that a densely-woven filter that traps very small particles may also reduce airflow so significantly that your HVAC system cannot work efficiently. Fortunately, both air conditioners and the ac filter are rated to protect against this situation. Every filter has a Minimum Efficiency Reporting Value or MERV. Standard residential air conditioners usually operate with filters in the 1-4 MERV range. Depending on your specific equipment, though, your system may accommodate a filter as strong as MERV 8. AC air filters that is too strong for your air conditioner might inadvertently cause damage.

A Better Option: A Whole-House Air Purifier

If the quality of the air in your home is unsatisfactory, there are many possible causes. Some potential contaminants are easy to diagnose, like dust, dirt, and the presence of pets or smokers. There are other sources that are harder to detect and which might be impossible for you to solve on your own. Examples include automotive contaminants from nearby roads or construction particles from nearby work sites. If you are looking for repair solutions for your home ac, check out AMH.

How Mechanical Air Filters Work

The range of purifiers and air cleaners currently being sold today operate on
a number of different principles in order to improve your home’s air quality. In many situations, the most effective solution is also the most straightforward one. A “mechanical” air filter, for example, is simply one that attaches directly to your home’s air ducts. It uses no electricity or moving components, relying strictly on their material construction to filter the air moving through your ducts. Because the pollutants being filtered out of your air are trapped in the filter, it needs to be changed regularly to maintain both air quality and heating/cooling efficiency. Consult with professional service technicians to confirm that you’re using the right air filters for your air conditioning system.

Electronic Air Purification

An electronic air purifier or cleaner is an option worth considering if you want to take more active steps to improve your home’s air quality. Electronic air purifiers rely on a range of different techniques – often in combination – to remove pollutants from the indoor air you breathe. In an electrostatic precipitator, for example, pollutants are given an electrical charge so that they will be attracted to and trapped on a collector plate. All the pollutants thus collected can be easily disposed of by removing the plate and cleaning it.

If you are interested in checking out more articles on AC Air Filters from AMH click here. You can also Call today or contact an A/C specialist for assistance.

Air Conditioning Professionals Tell You What You Should Do If Your A/C is Leaking

Posted by acman on May 31, 2018

Air Conditioning Repair Specialists: How To Address A Leaky AC

Now that summer is in full swing, there are some potential calamities lurking around the corner. When the heat takes hold, air conditioning is a must. Units that have not been cleaned often enough have the ability to pose massive problems. Sadly, this is likely to happen when least expected and probably on the most sweltering of all days. The list of malfunctions that can plague a system at an inopportune moment is long, but there are some steps that can be taken to substantially reduce the risk.

What Causes Air Conditioning Leaks?

Leakage issues are in fact the most typical reason for a non-working air conditioning system. There are some basic lessons to review in order to understand what occurs. AC units contain evaporator coils that serve to cool hot air that flows into the system. Water droplets are formed atop the coil, just like a cool drink will sweat when in the sun. This water drops down to a pan and out of the house through PVC pipes. Common reasons for leaks include clogged drain lines. This happens when dust and dirt are allowed to accumulate to the point where water can no longer flow, and a leak develops. Air filters that are contaminated with dirt are also common culprits. This is because air venting is impeded, the evaporator fails to work correctly, and extra amounts of water will drip. Faulty drain pans may also be to blame. If this pan is cracked, condensed water can escape and cause real problems. Anytime you are experiencing a leaking ac, consider reaching out to us as we do offer financing.

What To Do About A Leak

Once it is clear that the AC is malfunctioning, prompt action is critical. Do not assume the system will fix itself. Not only will the heat become unbearable, the leaky system can ruin carpeting and cause serious damage to ceilings and walls. If you are in need of residential or commercial air conditioning repair services, check out AC Man Of Houston.

Have A Cleaner On Hand

This should include water-soluble enzymes as well as agents that will not cause rust to form on the AC coil. Once sprayed onto the coil surface, allow it to remain for 20 or 30 minutes. Then it should be gently removed. Filters need to be vacuumed or rinsed fully and allowed to dry. These are some great do-it-yourself methods for tackling the issue. However, given the electrical nature of AC systems, it really is best to contact an air conditioning repair professional. Having a relationship with a repair contractor able to service a wide range of makes and models is the key to the rapid resolution of any problem. Air conditioning repair technicians are available in Houston, TX who can address even the most complicated of scenarios.

Air Conditioning Repair Experts

Those who do not already have the name is a season professional should ask friends and family members or perhaps even neighbors to obtain a trustworthy referral. Verifying licensure and certification of prospective service providers is also a great way to know that the service received will be high quality. Securing a comprehensive price quote is also a wise idea so that there are no unpleasant surprises once the work is done. By following a few easy steps, it is possible to rest assured that this summer will be cool, calm and free of AC catastrophes.

To learn more about AC Man Of Houston check out our blog, Call today or contact us for more insight on our services.

Knowing When Your AC Filter Should Be Replaced

Posted by acman on September 21, 2017

What You Should Know About Your Air Filter

Whether it’s an AC system in your home or car, the chances are you’ve had to change the air filter. Air filters trap dust and other types of allergens from circulating in the air of your home. If you live in Houston, then you know how hot it gets and the last thing you want is to breathe in such things. With that said, let’s discuss how air filters work and how you can keep them working for a longtime to come.

How They Work

Air filters do a lot of things. Most filters sit right between a cardboard frame and they were made with spun fiberglass. Filters play a role in keeping your air clean because it filters the dirty air that your HVAC unit brings in.

Particles such as animal fur, dust, pollen, bacteria and mold spores become trap by the fiberglass material. However, you do need to change it regularly. Doing this will ensure the air stays as clean as possible and free of particles such as the ones previously mentioned.

Maintaining Your Air Filter

Allergens and other particles will make their way into your home if an air filter is dirty. Not only that, but free air flow from your HVAC system may become restricted. This can increase energy bills due to the unit not working as efficiently as it should be working.

All you have to do is replace the filter or clean it. Don’t forget to check the filter once per month so you can either clean or change it. As a general rule of thumb, you should see light pass through the filter if you hold it up to a light.

Air Filter Issues

There are various issues that can be due to a clogged air filter. Your unit may not be working as good as it did in the best or the evaporator coils may be frozen. These things can be due to a filter that has to be changed.

It’s important that you understand your HVAC equipment. This can help you figure out what issues your unit has early on, which can save you money. If you need HVAC repair, Houston residents can rely on AC Man Houston. Contact us today or call AC Man Houston with any questions you have about your HVAC system.

How Your Thermostat May Affect Your HVAC Unit

Posted by acman on September 21, 2017

Parts of HVAC 101: The Thermostat

Your home has a mechanism that you use to control the temperature inside. This mechanism is called a thermostat, and you are probably familiar with using it. You set it to the desired temperature and enjoy greater comfort in your home. Let’s talk about how the thermostat works, what common problems there are and how you can make sure to have it work smoothly.

How A Thermostat Works

A thermostat keeps constant temperatures going inside your home. Once you set it to the temperature you want it at, it will make use of either the heater or the air conditioner to get the home to that precise temperature. It has a sensor that picks up the exact temperature of the room. When it picks up the current temperature it switches on or off like a light switch to get the heater or the air conditioner to get the room to the exact temperature desired.

Today’s thermostats are made with smart technology. This type of technology allows the thermostat to learn the heating or cooling patterns in the home. It learns how long it takes to get to a specified temperature making it more of an automated process to keep the home at the greatest level of comfort at all times. These smart thermostats also work to use energy efficiently, so your heating and cooling bills are always more affordable.

Thermostat Problems

Common thermostat problems include the following:

No Display

If the thermostat fails to display the temperature it could be that the breaker has tripped or that the battery is dead. Remove the cover and see if any dirt has built up or if there are loose wires or screws.

Temperature Does Not Change

When this happens, you want to check the thermostat for any dirt build up or a stuck anticipator. The heat anticipator signals the unit to turn on. If neither dirt nor the anticipator is the problem, see if the thermostat is receiving direct sunlight. This could be skewing the readout.

Thermostat Runs Constantly

If your air or heater are running all the time, the thermostat has a problem that should be looked at by HVAC maintenance Houston professionals. The problem could be the heat anticipator

Maintaining A Thermostat

Keep your thermostat clean and be sure that power is getting through the system. Dirt can cause several problems but all it takes is a gentle dusting every now and again to maintain the unit. Also, make certain that the thermostat is not facing direct sunlight. This can make your system operate at less than efficient levels. It can also make your home very uncomfortable.

If you still have problems with your thermostat, contact a professional HVAC company. A technician from the company can inspect the thermostat and find the problem. AC Man Houston is here to serve the area and will do both repairs and maintenance to make your HVAC system work perfectly. Schedule an appointment today and keep your air conditioner and heater in excellent shape.

Call us for more information!

How To Address Your Leaky HVAC Unit

Posted by acman on September 13, 2017

Why is Your Air Conditioner Leaking Water

If you notice that your air conditioner is leaking water then there could be several potential explanations for this and you should definitely get in touch with AC Man Houston. Whatever it turns out to be the cause, it’s a good idea to call in a technician to give you a proper diagnostic on the system. Commercial and residential A/C can leak for a number of different reasons:

1. A clogged condensate drain.

The condensate drain collects water and helps to transport it clear of the unit. If the drain is clogged up, then the A/C may leak in an unexpected area. Rust, algae, and dirt can build up in and around the drain.

2. The ambient temperature is too cold for A/C to be running.

Running the A/C when the air temperature is below 60 degrees can make the evaporator coils ice over, so try not to use your air conditioning in cold weather.

3. The drain line has mistakenly been disconnected.

Drain lines can sometimes work loose, or be accidentally disconnected during routine maintenance. If the line comes completely loose, then this could cause the air conditioning unit to leak.

4. The condensate pump has been broken.

A broken condensate pump cannot remove the excess water from the condenser pan, so the pan will overflow, which could eventually cause a leak.

5. The refrigerant level has become depleted.

A lack of sufficient refrigerant could cause the A/C coils to freeze, which will then lead to an overflow from the drip pan, and a leak.

6. Dirty air filters.

If the air filter gets too dirty, then this will restrict air flow to the evaporator coils, so they will not be properly ventilated. Eventually, the coils will get too cold and could become frozen. When the ice starts to melt off the coils, this will flow into the drip pan and may eventually lead to the pan overflowing and leaking.

A small amount of condensation from an A/C unit is normal, and the more you run the A/C the more condensation you are likely to experience. Excess water should not be a problem, though – if you see huge amounts of condensation or if there is a clear leak that you cannot explain, then you should call a technician right away. Or if you are in need of other services, such as heater maintenance in Houston you can contact AC Man Houston by visiting here!

How To Maintain Your Indoor Air Quality

Posted by acman on September 13, 2017

The Importance Of Keeping Pollutants Out To Maintain Better Indoor Air Quality

Outdoor air pollution is important, too, but approximately 90 percent of people’s days are spent indoors. People forget about indoor air pollution and air quality. Considering how much time people spend inside, indoor air quality concerns need to be addressed appropriately.

In fact, a study done by the EPA showed that the indoor air pollution levels in homes could be quite often up to five times worse than outdoor pollution. You have to ask yourself why. Then the study also showed that sometimes the pollution indoors could be 100 times worse. That is a staggering statistic, and remember, that’s from a study conducted by the EPA.

Three Types Of Pollutants

Particles are one type of pollutant in your home. Any type of construction or cleaning can, of course, stir them up even more. It makes you realize that when you clean, you really need to get to everything and do it right. You don’t want to be breathing in harmful particles.

Chemicals are also indoor air pollutants, and they can at times be quite harmful. Smoke from tobacco products falls into this category, and you know cleaning supplies make the list. It makes you remember that there are all natural cleaning solutions like essential oils that might be much better to use.

The third group of indoor air pollutants is biological contaminants. Pet dander is part of this classification of pollutants, as are viruses and bacteria of course and more. Cleaning is naturally important when it comes to biological contaminants. A property also needs to be ventilated properly.

Health And Air Quality Indoors

Health conditions can stem from bad indoor air quality, and it’s important to know what some of the symptoms are. For example, allergic reactions can occur, and people can experience shortness of breath. Common symptoms like sneezing and coughing are also on the list. There are plenty of other associated symptoms, too.

It is important to focus on prevention measures when it comes to the quality of the air inside your home. For instance, air filters always need to be changed out on time, which is typically after three months.

It is also suggested to have air ducts cleaned approximately every five years by a local HVAC company. Humidity levels are also important to monitor, and you might want to think about getting an air purifier or dehumidifier.

Whether you need your ducts cleaned, maintenance done, or you have a problem that needs to be repaired, AC Man Houston can help. They will get your home in shape when it comes to better indoor air quality. For residential HVAC repair in Houston, call AC Man Houston or contact us today.

How To Tell If Your Heater Is In Need Of Maintenance Or Repair

Posted by acman on September 5, 2017

Is Your Heater Making These Noises? You May Need Professional Repairs!

Loud, strange noises suddenly coming from your heater can be incredibly worrying. Without fail, hearing something of that nature means that some sort of problem has presented itself. In some cases, you may be able to resolve the matter yourself, but otherwise, you’ll need the aid of an HVAC repair expert.

To determine whether you need heater repair in Houston, follow along with the guide on common furnace problems below:

1 – Whistling

Whistling furnaces are most commonly associated with duct problems. Your furnace needs sufficient airflow at all times. If your ducts aren’t doing the job, you may need to replace them with larger models.

Before doing so, however, you need to check for any gaps in the ductwork. Duct gaps – particularly where the duct actually joins the furnace – are another common cause for furnace whistling. You should also make sure you don’t have a clogged filter, especially if the problem seems to have developed out of nowhere. A quick, simple test is to simply remove the filter to see if the whistling ceases.

2 – Rattling

Rattling is often a result of a loose duct. You should try reinforcing them with duct tape or extra screws. You can even try adding rubber pads or cork material under the furnace. If you need help lifting it up, a pry bar from your local hardware store will do the trick.

3 – Bouncing

If it sounds as if your furnace is bouncing, you likely have worn bearings. Naturally, you’ll need to replace them. In this instance, your best bet is to work with an HVAC professional.

4 – Banging

Banging sounds that seem to startup as soon as the furnace comes on are generally related to a number of potential issues. Check to see if you can determine exactly where the sound is coming from. If the ducts seem to be the issue, this is likely due to fluctuation that happens when the pressure inside them changes. Check for weak spots and screw on an additional piece of metal for more support.

On the other hand, you could also be looking at a possible problem with your gas-ignition. In this scenario, you might hear something that sounds like a small explosion when the furnace ignites. If you notice that the flame seems to change or doors shaking on the furnace, that’s generally a tell-tale sign. Of course, an issue of that level needs to be handled by a professional.

5 – Squeaking

Squeaking sounds coming from the furnace usually signify that the metal panning or ducts aren’t secure. You can repair this quite easily yourself. Simply reinforce, rehang, or replace the affected parts.

If you aren’t confident that you can fix a problem with your furnace yourself, that’s potentially for the best. You should always play it safe and work with a specialist to be sure that the job is done. When it comes to the local heater repair in Houston in particular, you can always rely upon AC Man Houston in particular. Feel free to get in touch with us by calling (713) 460-2653 or contacting us anytime you have a question or concern!