Tag: ac repair

Common Furnace Problems

Posted by acman on

Most Common Furnace Problems

Is your furnace blowing cold air instead of a blast of warm air? Are you experiencing a loud noise coming from your furnace and are not quite sure what to do about it? Such issues are a sign of problems with your HVAC system and will be the source of worry when the winter season comes knocking at your door. Knowing the common warnings can help you take the necessary corrective measures in good time so that you can have your furnace working in at optimal capacity. AC Man Of Houston came up with a list of the 4 most common furnace problems that people come across. The top furnace problems are listed below in no particular order.

1. Loud Grinding Noise

Scraping sounds that are similar to that of metal rubbing against another metal is a sure indication of something going wrong with the blower wheel. When the furnace starts making such a loud noise, then you want to switch off the machine and call AC Man Of Houston to check your furnace immediately. The issue with the blower wheel may vary so it is important to get an expert furnace repair specialist to come out and take a look. It could be that the wheel is loose and only needs to be tightened, that is if it is not damaged. If it is damaged, then the blower wheel will have to be replaced. The problem could also potentially be a broken motor mount which can be the primary cause for the entire blower assembly shaking.

2. Loud Bang When Your Furnace Kicks On

Know there may be several things going wrong when you hear your furnace making loud popping noises when it starts to run. The two likeliest culprits would be the ignitor or furnace burner are dusty, and this keeps the burning from igniting. The result of that is a buildup of gas in the furnace that then creates the loud noise. If left unchecked, it can eventually cause the heat exchanger to crack. Moreover, it is a notable problem that poses significant safety concerns and it must be taken care of immediately. Furnace repairs may require the replacement of the heat exchanger and can also help prevent a carbon monoxide leak which in many cases can be fatal. The cause of the loud bangs may also be due to the expansion and contraction of the air ducts when the system starts blowing hot air and then the cooling after that finally begins once the furnace is off. Most homeowners with HVAC systems that have metal ducts are not new to such an annoyance. If the cause of the loud noise is the air ducts, the issue at hand could be with obstructed vents, a clogged air filter or undersized ducts.

3. Whining Noise

In case the furnace produces a high-pitched sound, the problem may be with the shaft bearings that need oiling or with the blower motor or blower belt that are faulty. If you run the furnace seasonally, then it may be easy for you to pinpoint the problems and have them fixed. You may want to get advice from an expert furnace repair specialist from AC Man Of Houston. Don’t hesitate to reach out to us today. We are more than happy to help you with all of your furnace repair questions and concerns. We can help improve your indoor air quality today.

4. Furnace Blasting Cold Air

If the HVAC is producing cold air, then the issue may be due to a number of different reasons. The thermostat should be the first thing to check, which is also what any heating equipment technician will start with before looking at any other potential problems. You should check if the system is set to ‘auto’ and not ‘on’ so that the thermostat does not blow continuously and not releasing heated air. Setting it to ‘auto’ ensures that the machine only blows when the sensors can sense the need to heat up the air in the room. After the thermostat, the next thing to check are the air filters. Changing the filters every month is highly recommended because it keeps them from getting dusty and clogged up. The dust and blockage restrict the movement of air through the filters into and out of the furnace. The result of this is an overheated HVAC system which causes the equipment to stop working. The ductwork could also be the problem in that it may be installed incorrectly, it is leaking, or the wrong design was used. Such issues with the ducts could also cause the system to blow cold air and have it running continuously trying to achieve the desired heat or for a more extended period than expected to warm up the place. Besides the things mentioned above, that may be the reason behind your HVAC system blasting cold air, other causes of the heating inadequacy include normal wear and tear of the system.

For more information about common furnace problems and other related content, make sure to check our blog. If you would like to speak with a professional furnace repair specialist contact us today by giving us a call at (713) 460-2653.

Houston AC Repair: Why Is My Air Conditioning System Not Cooling?

Posted by acman on

AC Repair Houston: Reasons Why Your Air Conditioner Is Not Keeping You Cool

Do you have an air conditioner running in your home, yet the air is not truly cool? Maybe it is blowing out warm or just plain hot air. There are several things that may be wrong with your A/C if it is not working properly. Below you are going to find the solutions to some very easy fixes that may help you to get it running properly and what can only be fixed by a professional.

Easy Air Conditioner Problems That You Can Fix

Problem 1: Thermostat Mistakes

Do you have an A/C that blows cold air at times and lukewarm other times? This may be due to the fan setting being switched to “ON”, which is going to cause the fan to run all the time, even when the air is not being cooled by the unit. Easy Solution: Simply ensure that the thermostat is set to work on “AUTO”.

Problem 2: Air Filter Issues

A dirty air filter is going to reduce the amount of air flow in the unit, which can cause several problems. First, the unit is going to struggle to circulate the correct amount of air that is needed to bring the house to the desired temperature. In addition, the evaporator coil is going to freeze up and air will not be able to circulate at all, meaning you get almost zero cool air. Solution: Take the air filter out and examine it to see if it needs a cleaning. If you are indeed having issues with your residential air conditioner, contact an ac repair Houston professional today.

Problem 3: Dirty Unit

The way an air conditioner cools a house is a rather simple process. The evaporator takes hot air in and transfers it to the outside unit known as the condenser. However, if the condenser is dirty or covered, it is not going to be able to dissipate that heat correctly. This causes the unit to overwork and not be able to cool the home properly. Solution: Gently clean the outside of the unit with a garden hose, clearing off the debris. It is important that you do not spray the unit with the hose on the highest setting as this may bend the fins that allow airflow to the condenser. While you are outside, be sure to remove all tall weeds and leaves away from the unit. You want your unit to have the ability to breathe on those hot summer days too! A clean and well-maintenanced air conditioner will bring about better indoor air quality.

Problems Only An AC Repair Houston Expert Can Solve

There are going to be problems that only a ac repair Houston professional can take on, these are just a few of them.

Problem 1: Broken Or Faulty Condenser Fan Motor

If the init’s fan has gone bad, there is no way that it can dissipate heat, which simply means you are not going to get any cold air.

Problem 2: Low Refrigerant

The refrigerant that is found in the unit is the key ingredient to absorbing the heat from the air. When there is not enough refrigerant in the unit, it is not going to be able to cool the air. If you do have low refrigerant it more than likely means you have a leak. Some typical signs that you have a leak include:

  • Ice found on the outside of the unit and refrigerant line.
  • A hissing or bubbling noise coming from the unit.
  • The unit can not cool the home on hot sunny days but is able to work fine in the evening or on cool days.

If you see any of these signs, it is time to turn the unit and call an ac repair Houston professional as soon as possible. When you run the unit in this state, it is possible to damage the unit beyond any possible repair.

Problem 3: Faulty Compressor

The compressor of your unit is the heart of the system, it is the part that circulates the refrigerant through the unit and helps to cool it. If this part is damaged, the unit is going to be unable to cool the house. If the compressor is damaged, it is going to need to be replaced. However, this can be a rather expensive process. If you do not have a warranty on the unit, it may be best to simply replace the unit at this point.

For more insight on the latest AC Man Of Houston, articles check out our blog. If you are interested in speaking with a professional AC Repair Houston expert, contact by giving us a call today at (713) 460-2653tel:(713) 460-2653

Katy TX A/C Repair: Learn How To Clean The Air Conditioning Evaporator Coils

Posted by acman on

Katy TX Air Conditioning Repair: A Guide On How To Properly Clean Evaporator Coils

Regular preventive maintenance is essential in making sure your air conditioner continues to work properly. You should have maintenance performed at least once per year before the cooling season begins. Season maintenance should be performed by a professional air conditioning repair Katy TX company. Tasks that should be performed include system adjustment and testing, component replacements, minor repairs, air filter changes, and cleaning condenser coils and evaporator.

The Basics Of Cleaning A/C Evaporator Coils

Check and clean the evaporator coils as needed. Monthly cleaning might be required if the coils tend to easily collect debris and dirt. Otherwise, you might need to clean them out every three months or so during the cooling season or yearly as part of your regular preventative maintenance. AC Man of Houston offers maintenance services for commercial properties.

Gaining Access To Clean The A/C Evaporator Coils

There should be an access to the indoor air handling unit that you can remove in order to get to the evaporator coil. Check your owner’s manual if necessary to find the evaporator coil and access panel. On the thermostat, turn your air conditioner off. To get the access loose, remove the screws or another type of fasteners. Set the screws and panel aside where you won’t separate or lose them. Check out our residential services by clicking here.

Using Compressed Air To Clean The A/C Evaporator Coils

  1. You can use compressed air to remove light accumulations of materials such as dirt by blowing them off of the evaporator coil.
  2. Direct the compressed air over the coil. Move in the opposite direction of regular air flow from the cleanest to the dirtiest side.
  3. For pieces that are more stubborn, take the air nozzle and please near the bottom part of the debris. If high-pressure air is being used, direct it either through the fins directly or at a 90-degree angle. That will prevent the fins from getting damaged.
  4. Maintain consistent airflow over the coil. That will dislodge the buildup without it being further forced into the fins which will make it harder to remove.
  5. Avoid blowing debris, dirt, and dust into the living spaces of your home or into your ductwork system. Wear eye protection so that material is kept out of your eyes. Use a shop vacuum, if necessary, to collect the material as it is being dislodged.

Using A Brush To Clean The A/C Evaporator Coils

Brush cleaning is a very effective way to remove minor dirt accumulations from the evaporator coils. It enables you to avoid having to use chemicals or liquid and provides you with greater control in terms of the amount of pressure applied to the fins and coils.

  • Apply your brush to the evaporator coils to sweep away dirt accumulation.
  • Use the brush to scrub and break lose materials that are harder to remove.
  • Avoid using a hard-bristle brush or wire brush since the might damage the fins.

Using Commercial Cleaners To Clean The A/C Evaporator Coils

There are several commercial cleaning brands that you can use to clean evaporator coils. A majority of them are foaming kinds that break down and then drain into the drainage system of the unit. Consult with a reputable local HVAC contractor for recommendations on the best clean to use for your specific situation.

Using Water And Mild Detergents To Clean Your A/C Evaporator Coils

Instead of using a commercial cleaner, warm water and a mild detergent can be used for cleaning the coils.

  • Mix a simple detergent and warm water into a spray bottle, garden sprayer or hand sprayer.
  • Apply the detergent and water solution to your evaporator coils.
  • Let the solution soak in for a few minutes to that it can soak in and also loosen debris.
  • Use a brush or soft close to wipe away loose material.

Learn more about AC Man of Houston and our air conditioning repair Katy tx services by checking out our blog, contacting us for questions or concerns or calling us for immediate assistance.

The #1 AC Repair Company In Houston Shows You How To Turn Off The Power To Your Air Conditioning System

Posted by acman on

Top-Rated AC Repair Company: How to Shut Off the Power to Your Air Conditioner

When you are repairing your air conditioner or installing a new unit, you must turn off the power to the unit. Turning off the power not only protects you from getting shocked, but it also protects the equipment from power surges that can damage the unit. Before turning off the power, you need to turn off the heating and cooling system by turning off the thermostat. If you are considering changing out your thermostat to a new Nest thermostat, you will want to ensure that the power is completely off for your thermostat and your heating and cooling system. If you are unsure how to install a new thermostat, install a new heating and cooling unit or repair your existing system, an AC repair company can help.

Switches That Control The Cooling And Heating System

You will need to determine which switches control the heating and cooling system in your house. Most of the time, these are found in your breaker box or fuse box; however, many units will have a separate breaker box located outside next to your heating and cooling system. It is important to know that if you have a split heating and cooling system, there may be a switch, fuse or breaker for the heating system and a separate switch, fuse or breaker for the cooling system.

Breaker Box

Most of the time your breaker box will be labeled. If your breaker box is labeled, you can flip the breakers for your heating and cooling system. If your breaker box is not labeled, you can either try to find the breakers that control your heating and cooling system or simply shut off the main breaker. If you opt to shut off the main breaker, you should be aware that it will turn off all power to your home. If you shut off only the breakers to your heating and cooling system, verify that all power to the heating and cooling system is turned off by attempting to turn on the heat setting, the cool setting and the fan of the system by using your thermostat.

Switches May Look Like A Breaker Box

Certain heating and cooling systems will not have a breaker in the breaker box. Instead, it will have a separate small breaker box located near the heating and cooling system. These stand-alone switches may look like a breaker box, or they can look like a light switch. If there is a switch similar to a light switch near your heating and cooling system that does not control a light, switch it off to ensure power to your heating and cooling system is off. Once you have installed your new Nest thermostat, you will need to turn the power back on. If you shut off the main breaker to your house, you will need to reset all of your electronic devices and clocks. If you are in need of AC repair company services for your residential property, click here.

The Five Installation Steps to Follow After Installing a New Thermostat

  • Step 1 – Turn off your heating and cooling system at the thermostat. Slide the lever to the off position. Doing this will prevent your thermostat from turning on when you turn the circuit breaker on.
  • Step 2 – Go to your circuit breaker box. Your circuit breaker box can be in several locations, such as the garage, the basement, your laundry room, in a closet or on the exterior of your home.
  • Step 3 – Reset the circuit breaker for your heating and air system. Find the breakers that are marked heating and cooling and move them to the on position. If the breaker is in the neutral position, you will need to turn the breaker off and then back on.
  • Step 4 -Wait 30 minutes. Your heating and air system must have time to reset the internal circuit breaker.
  • Step 5- Turn the thermostat to cool and begin enjoying your new Nest thermostat. If your breaker trips when you turn your thermostat on, you may have another issue. Try resetting the circuit breaker. Call for immediate assistance. If this does not work, contact your local AC repair company.

Air Conditioning Repair Houston Company: The Ultimate Maintenance Checklist For Your AC System

Posted by acman on

Houston AC Repair Company: A Master Checklist To For Standard Air Conditioning Maintenance?

Just like your car needs maintenance on a regular basis to run properly and smoothly, your air conditions also need to have care on a regular basis. Caring for your air conditioner proactively will help to extend your unit’s life, and also save you a lot of money on Houston AC repair and replacement expenses. Something as basic as changing your unit’s air filter can also prolong its efficiency and improve your home’s air quality. Soon, many homeowners will be seeking relief from the summer heat that comes from an air conditioning system from AC Man Of Houston. You need your system not only to cool your house the first day that it gets hot outside but each time you turn on your air conditioning system this summer for your commercial or residential property.

Essential Indoor Equipment For Your Overall Health And Well Being

Start with the thermostat on “off” and the temperature turned to around 80 degrees. The steps below serve as a guide to help you understand whether your air conditioning system needs maintenance. By checking through the list below you can avoid high costs of repair by making sure to stay on track with your ac system. Check the following:

1. Check out the thermostat.

Is it an outdated one? You can save energy and money by installing a new programmable thermostat.

2. Any exposed ductwork should be checked for wear

That can be a source of inefficiency or cooling loss in the house.

3. Check out the air vents that are around your house

Remove all items that might block airflows, like toys, furniture, or drapes.

4. Check out the drain line

The drain is located near the indoor cooling coil, usually mounted to the basement over the furniture. Flushing a cup of chlorine bleach down the air conditioning drain and rinsing it with one gallon of water, will help your drain stay clear all summer long. Drain lines on your air conditioner can become clogged whenever there if dirt build-up that the indoor coil collects. Clogged AC line damage can occur whenever the A/C drain line becomes clogged. Whenever the drain line gets clogged, there still needs to be somewhere for the water to go. At first, there will be a back-up of water inside of the drain pan. That can result in your home suffering serious water damage. Your drains lines should be professionally cleaned once a year at least.

5. Change the air filter

You should change the filter every three months (or follow the manufacturer recommendations) and definitely before the heating or cooling season starts.

6. Circuits

Be sure that you are aware of everything that is happening so you can prevent damages from occurring while trying to fix this. Also, you want to make sure to check circuits to ensure that electrical connections are turned on.

7. Power is turned off

Make sure that the power is turned on at the air conditioning/furnace unit. The next step is to check for wear and overgrowth on the outdoor equipment. Essential Outdoor Equipment For Your System

8. Inspect the outdoor condenser unit

Check to be sure that are no blockages near or inside of the equipment. Also, clean the area surrounding the unit. Debris, vines, or leaves can block the internal components and performance can be affected.

9. Visually inspect the refrigerant lines

These lines need to be insulated. If they are insulated properly it will help to improve the system’s efficiency. Repairs to refrigerant lines or insulation should be performed by a professional.

10. Check electrical wiring

Check to ensure that the outdoor electrical wiring does not have any wear on it. If you do see any wear or damage, call a professional to have it serviced before you use your system.

11. AC retirement age

Be familiar with when your air conditioner might have reached its retirement age. All air conditions have a certain lifespan. Even if you properly maintain it, it will wear out eventually.

For further information on Houston ac repair services we offer, contact us by calling us today. For more related content, check out our blog. 

A Top-Rated AC Repair Houston Company Talks About The Way Air Conditioners Work

Posted by acman on

A Guide By The #1 AC Repair Company On How Air Conditioners Work In Houston

If you moved recently from a house where you mainly used window-mounted air conditioners, fans, or were considering having a central air unit installed, you might not be that familiar with central air conditioning systems. However, don’t worry. We are here to help you with AC repair Houston services. Air conditioning units work the same way that the refrigerator does, just on a bigger scale. Basically, your air conditioner converts gas quickly into liquid and then back again through using a chemical that transfers heat from in the air from inside of your house to the outside.

Ducts

Basically how it works is that heat is pulled out of a home by split cooling systems with refrigerant that circulates in between the air handler and condenser. Cool air is distributed by the supply ducts from the air handler into the rooms in your house. Warm air is carried back by the return ducts to the air handler so that it can be cooled and filtered through a 16x25x1 furnance Filter or similar. When ducts are sized properly they deliver conditioned air quietly and evenly throughout your home. We offer many services at our ac repair Houston company, especially for residential properties.

Registers

Every room needs to have two grilles at least: one that is connected to a return and the other to a supply duct. Supply registers should ideally be located near or on the ceiling, while return registers should be on or near the floor.

Air Handlers

This type of indoor equipment comes with an expansion valve that transforms refrigeration into a cool liquid that flows throughout the evaporator coils. Air is pushed over the coils by a blower, which heats up the refrigerant into the gas form that is returned to the condenser.

Condensers

A warm gaseous refrigerant is taken from your house, and then the compressor pressurizes it and condenses it back into liquid form as the coils are cooled by a fan.

Indoor Unit

Typically the indoor unit is located in a basement or closet close to where the furnace filter is. The unit is comprised of a coil box containing the evaporator. The evaporator enables the refrigerant – which is a cooling fluid contained inside of the coiled piping and referred to by its brand name sometimes – to absorb heat and evaporate. After the heat has been absorbed from inside of your house, only cool air is left and sent back into your house. Just like water absorbs heat from the stove to evaporate or boil, heat is absorbed by refrigerant from your home. That means that both refrigerant and water turn to vapor from a liquid as heat is absorbed. we offer ac repair Houston services for commercial properties.

Outdoor Unit

Usually, the outdoor unit is located on the side or rear of the house. This is where the heat gets dispersed from inside of your house. It is comprised of a fan, condenser coil, and compressor. The heat that is absorbed from the air in your home gets transferred over to the refrigerant. Next, it gets pumps into the outdoor unit. The heat gets absorbed and the refrigerant moves it over to the outdoor coil, where it passes through the unit’s compressor. The main job of the compressor is to move the refrigerant throughout the air conditioning system. That is important since you can then continue to reuse the refrigerant for cooling your home. This refrigerant gets compressed into a higher pressure and then is moved throughout the condenser or outdoor coil. As the refrigerant is passing through the condenser, ambient air is delivered by a fan across the system’s condenser coil which causes it to cool down. As this process is complete, the heat inside of your home gets dispersed into the air outside of your home. Then the refrigerant gets pumped back inside and the entire process repeats itself.

Were you aware that cooling your home was less about cold air being increase and more about eliminating existing heat? For more related articles check out our ac repair Houston blog or call us for assistance.

AC Heroes: The Ultimate Air Conditioner Air Filter Guide

Posted by acman on

A Basic Guide To Understanding AC Air Filters

What Do You Risk By Installing The Wrong AC Air Filter?

Professional HVAC technicians recommend replacing air filters every three months at a bare minimum. Changing filters on a monthly basis is ideal for maintaining optimum air quality in your home. There are other benefits to frequent filter changes, though – one’s technicians care about even more than indoor air quality. A clean filter does a better job of protecting your air conditioner. That is, in fact, the filter’s primary purpose. If you installed the wrong filter, you may be putting your air conditioner at significant risk.

How Your AC Air Filter Really Works

While modern filters do an effective job of filtering allergens and other unwanted contaminants out of the air in your home, their point and purpose remain to safeguard the equipment in your AC system. Without a filter, your air conditioner could easily suck in particles large enough to damage its working parts. A filter needs to defend against this possibility without unduly restricting the amount of air flowing through the system. As a filter accumulates more particles, it also starts restricting more airflow. This is why your filter needs to be changed regularly to keep the system running smoothly.

Considering An Air Filter Upgrade?

An increasing number of homeowners are interested in improving the quality of the air in their homes. This leads many people to consider installing more potent filters in their air conditioning systems. The problem here is that a densely-woven filter that traps very small particles may also reduce airflow so significantly that your HVAC system cannot work efficiently. Fortunately, both air conditioners and the ac filter are rated to protect against this situation. Every filter has a Minimum Efficiency Reporting Value or MERV. Standard residential air conditioners usually operate with filters in the 1-4 MERV range. Depending on your specific equipment, though, your system may accommodate a filter as strong as MERV 8. AC air filters that is too strong for your air conditioner might inadvertently cause damage.

A Better Option: A Whole-House Air Purifier

If the quality of the air in your home is unsatisfactory, there are many possible causes. Some potential contaminants are easy to diagnose, like dust, dirt, and the presence of pets or smokers. There are other sources that are harder to detect and which might be impossible for you to solve on your own. Examples include automotive contaminants from nearby roads or construction particles from nearby work sites. If you are looking for repair solutions for your home ac, check out AMH.

How Mechanical Air Filters Work

The range of purifiers and air cleaners currently being sold today operate on
a number of different principles in order to improve your home’s air quality. In many situations, the most effective solution is also the most straightforward one. A “mechanical” air filter, for example, is simply one that attaches directly to your home’s air ducts. It uses no electricity or moving components, relying strictly on their material construction to filter the air moving through your ducts. Because the pollutants being filtered out of your air are trapped in the filter, it needs to be changed regularly to maintain both air quality and heating/cooling efficiency. Consult with professional service technicians to confirm that you’re using the right air filters for your air conditioning system.

Electronic Air Purification

An electronic air purifier or cleaner is an option worth considering if you want to take more active steps to improve your home’s air quality. Electronic air purifiers rely on a range of different techniques – often in combination – to remove pollutants from the indoor air you breathe. In an electrostatic precipitator, for example, pollutants are given an electrical charge so that they will be attracted to and trapped on a collector plate. All the pollutants thus collected can be easily disposed of by removing the plate and cleaning it.

If you are interested in checking out more articles on AC Air Filters from AMH click here. You can also Call today or contact an A/C specialist for assistance.

Air Conditioning Professionals Tell You What You Should Do If Your A/C is Leaking

Posted by acman on

Air Conditioning Repair Specialists: How To Address A Leaky AC

Now that summer is in full swing, there are some potential calamities lurking around the corner. When the heat takes hold, air conditioning is a must. Units that have not been cleaned often enough have the ability to pose massive problems. Sadly, this is likely to happen when least expected and probably on the most sweltering of all days. The list of malfunctions that can plague a system at an inopportune moment is long, but there are some steps that can be taken to substantially reduce the risk.

What Causes Air Conditioning Leaks?

Leakage issues are in fact the most typical reason for a non-working air conditioning system. There are some basic lessons to review in order to understand what occurs. AC units contain evaporator coils that serve to cool hot air that flows into the system. Water droplets are formed atop the coil, just like a cool drink will sweat when in the sun. This water drops down to a pan and out of the house through PVC pipes. Common reasons for leaks include clogged drain lines. This happens when dust and dirt are allowed to accumulate to the point where water can no longer flow, and a leak develops. Air filters that are contaminated with dirt are also common culprits. This is because air venting is impeded, the evaporator fails to work correctly, and extra amounts of water will drip. Faulty drain pans may also be to blame. If this pan is cracked, condensed water can escape and cause real problems. Anytime you are experiencing a leaking ac, consider reaching out to us as we do offer financing.

What To Do About A Leak

Once it is clear that the AC is malfunctioning, prompt action is critical. Do not assume the system will fix itself. Not only will the heat become unbearable, the leaky system can ruin carpeting and cause serious damage to ceilings and walls. If you are in need of residential or commercial air conditioning repair services, check out AC Man Of Houston.

Have A Cleaner On Hand

This should include water-soluble enzymes as well as agents that will not cause rust to form on the AC coil. Once sprayed onto the coil surface, allow it to remain for 20 or 30 minutes. Then it should be gently removed. Filters need to be vacuumed or rinsed fully and allowed to dry. These are some great do-it-yourself methods for tackling the issue. However, given the electrical nature of AC systems, it really is best to contact an air conditioning repair professional. Having a relationship with a repair contractor able to service a wide range of makes and models is the key to the rapid resolution of any problem. Air conditioning repair technicians are available in Houston, TX who can address even the most complicated of scenarios.

Air Conditioning Repair Experts

Those who do not already have the name is a season professional should ask friends and family members or perhaps even neighbors to obtain a trustworthy referral. Verifying licensure and certification of prospective service providers is also a great way to know that the service received will be high quality. Securing a comprehensive price quote is also a wise idea so that there are no unpleasant surprises once the work is done. By following a few easy steps, it is possible to rest assured that this summer will be cool, calm and free of AC catastrophes.

To learn more about AC Man Of Houston check out our blog, Call today or contact us for more insight on our services.

AC Man Of Houston Repair Services: The Things You Wish You Knew Before Purchasing An Air Conditioner

Posted by acman on

A/C Repair Solutions: Everything You Should Know Before Buying An Air Conditioner

It is easy to see why HVAC companies and stores that offer cooling units will be busier than ever once the summer season rolls around. Air conditioners are an essential appliance to have in your home, especially when you live in an area that is known for blazing temperatures. However, this is also the type of appliance that calls for a bit of dedication on your part as a homeowner. Not only is an air conditioning unit a big investment with maintenance and utility bills but you need to think about analyzing your needs. If you are thinking about buying a newer air conditioner, it is important that you think about all of the factors involved so that you can make the right decision. By making the best selection, you can lower the times you need to get air conditioner repair services.

Buying Your Air Conditioner

To start with, you need to stay away from buying such a unit from some sort of unknown seller. You need to go with a name that you know and trust so that you can be sure you have a unit that functions beautifully at all times. How can you know that you have the right air conditioner to give you everything that you need from a comfort standpoint? Do you have the ability to install the air conditioning unit on your own? When you think about buying online, you need to take the extra time to read through all of the feedback and reviews so that you can get some insight as to what others are saying. You need to know that most reputable HVAC companies are not going to install a unit that you bought online simply for liability reasons. For most people, buying from a trusted HVAC company and having them install the unit for you is the way to go. You want to make sure that you are investing in the best ac option so you can improve your indoor air quality.

What You Need To Know Before Buying An AC

Shop around for a company that offers a range of guarantees and come with the proper certifications for the products they provide. Never go with a company that is only willing to offer less than two years for maintenance. You want to have a company that is willing to take responsibility should something go wrong within a certain timeframe of installing the unit for you. It is important that you understand the dynamics and framework of your home so that you have the right air conditioning unit for your specific environment. When it comes to installation, you need to work with professionals that are able to get in and out in a timely fashion. Working with AC Man of Houston will give you all of the personalized attention that you need to have the right unit for your environment so that you and your family can remain cool and comfortable no matter what the temperatures may be on the outside of your home. We can work with you to save you money on your energy bills and cut down on the risk of potential damage in the future with a professional installation. You can even count on us for all of the help and advice that you may need when it comes to using your air conditioning unit so that you can make the most of it. When you make the right purchase you can avoid having to hire air conditioner repair services right away.

Choosing Between A Split Or Ductless A/C System

You are never expected to know all of the differences when it comes to the types of units that are available today. While a window unit may seem like an easier option, going with a ductless system will help you to enjoy the most efficiency. In many situations, homeowners will find that going with the most efficient way of cooling will be well worth it in the end. For example, if you are in a room where the windows are not ideal for a unit to be placed, opting for ductless will give you results without a lot of hassle.

Air Conditioner Repair, Maintenance, And Purchase Costs

Whenever it comes to this kind of an investment for your home, you need to be sure that you weigh all your options. AC Man of Houston will gladly go into detail regarding each option and work on a way to lessen the financial burden for you. It is always our goal to install the most efficient unit at a price that you can live with. If you need air conditioner repair services for your a/c, contact us today.

For more information, don’t hesitate to Call today or contact AC Man Houston for more.

How An HVAC Expansion Valve Works

Posted by acman on

HVAC Parts 101: The Expansion Valve

Among the various comfort appliances that we have in our homes and businesses, the vast majority will reckon that the central air conditioning system is indispensable. Cooling our homes in the host summers make their presence ever-more appreciated. However, the entire system could not work properly without the various components and parts working together and properly to keep your home or business cool all year. It is thus important for homeowners and business owners to have at least a passing idea of the various components of the system or you may end up needing Houston TX AC repair.

Herein we are going to delve into the expansion valve, which is an integral part of the system.

What Is An Expansion Valve And What Does It Do

To understand what an expansion valve is, you need to first understand how the cooling function of AC systems works. Air conditioners usually work by moving a refrigerant throughout the HVAC. The refrigerant changes from liquid to gas back to form a complete cycle. In this regard, the cool liquid refrigerant is pumped into the house or business premises, where it absorbs heat.

Due to absorbing the heat, the refrigerant turns from liquid to gas. The gaseous refrigerant moves to the exterior portion of the HVAC where the absorbed heat is released, cooling the refrigerant and turning it back into a liquid.

However, even though at this stage the refrigerant tends is cool, it is usually never cool enough to absorb heat once it is pumped into your home or business as the temperature difference is usually negligible. This is where the expansion valve comes in. The Expansion valve expands the liquid refrigerant by rapidly reducing the pressure under which the liquid is in, cooling it very fast.

AC Man Houston | HVAC Maintenance in Houston TXCharacteristics Of A Failing/Failed Expansion Valve

These are the sign that the expansion valve is faulty:

  • Frozen coil
  • Constantly running system
  • Lack of cold air from your A/C

Fortunately, this part of the AC system can be cheaply and easily be repaired or replaced. Professional Houston TX AC repair will get your underperforming or faulty expansion valve working properly within a short time. Call today or contact AC Man Houston if you suspect your expansion valve is faulty.