Finding Mold On Your Air Conditioner: What Next?

Air Conditioner Maintenance Houston: Dealing With Mold

Why are so many air conditioning systems impacted by mold? The answer to that question is simpler than you might think.

Mold thrives in dark, damp, and dirty environments. Dealing with mold is an essential part of air conditioner maintenance Houston.

When mold spores move through the air, they seek out damp areas. Once they find the right spot, the spores begin to spread.

In my experience, a mold is more likely to appear on the outside of an air conditioner than the inside. It’s also more common to see mold on the outside of ducts than on the inside. Mold usually isn’t found internally. Instead, it is more likely to appear on truck lines, the exterior of air distribution plenums, and on supply air grills (images below).

If you’re trying to find a solution to your mold problem, there are a few questions you should be asking yourself.

First, you should figure out why water is forming around your air conditioner.

Once you’ve figured that out, you’ll want to find a way to get rid of the moisture.

If there’s no moisture, mold won’t be able to grow. If you can rid your air conditioner of water, mold won’t have a chance to grow. The moisture that is found on air conditioning systems often comes from condensation. Air conditioners combine cold temperatures with hot ones. Have you ever noticed droplets of water appearing on your cold beverages? It’s the same basic effect. The mold would appear on beer or soda cans too if we left them out for long enough.

Addressing A Mold Problem

If you want to handle a mold problem, you’re going to have to identify problem areas first. Here are some of the areas that are most likely to be impacted:

  • Supply Air Grills
  • Supply Plenums
  • Trunk Lines
  • Flex Ducts

Thankfully, every one of these problems has a cure. If you’re trying to take care of mold on air grills, you could replace the grill in question. You should also make sure the grill has the right fit.

If you want to take care of supply plenum mold, you may want to replace the plenum with something that has a higher insulation value. You may also want to have a professional remeasure your duct sizing.

If you have mold on your trunk lines, your first step should be to replace the duct board. You could also try increasing the value of the insulation. Eliminating cold air leakage is a great first step.

Lastly, if you’re trying to deal with flex ducts mold, you should make sure that the ducts aren’t touching. If possible, you should keep a dehumidifier near the ducts. You may also want to have a professional measure the ducts and improve the airflow in the area.

It is more than possible to prevent mold from developing on your air conditioner. As long as your air conditioner is properly installed and maintained, you’ll be able to avoid issues like these. Air conditioning mold problems are completely preventable. Look into air conditioner maintenance Houston today.

If you have mold on your air conditioning system, you need to take care of it right away. Mold can cause many negative effects. It’s better to treat the problem sooner rather than later.

Call or contact AC Man Houston before it’s too late! One of our HVAC specialists is waiting and ready to address your mold issue! For an in-depth look at the services we provide, visit here.

Leave a Reply

Your email address will not be published. Required fields are marked *